BACK Pure Water

ECOsmarte Chemical-Free Pool and Spa

    Standard System

In Ground Pool

Standard Inground Pool System
The Standard Turbo System is designed for inground pools from 10,000 to 50,000 gallons. The user can select ionization or oxidation by through the use of a toggle switch. Initially the unit will be placed in the ionization mode. Once the copper ion level reaches 0.4-0.7ppm, the system should be switched to provide oxidation. Most pools will require the system to be in the ionize mode 6-12 hours one day per week to maintain the desired ion level. The remaining time, the unit should be in the oxidation mode to remove contaminants from the water. The system can adequately keep the pool water clean by running the pump only 6-12 hours per day.

Above Ground Pool

Above Ground Pool System
This system operates the same as the Standard Turbo In-Ground System except it is designed for smaller volume applications. It is intended to work with above-ground pools with less than 10,000 gallons of water. These systems come with the standard controller and a smaller 1.5 ionization/oxidation chamber.

Spa System
The spa system is designed for spas, hot tubs and swimming lap pools of any size up to 5,000 gallons. Due to the small amount of water, the frequency and amount of ionization and oxidation is significantly less than other applications. The ECOsmarte Spa System is specifically engineered for treating small amounts of water.

Standard System Components
ECOsmarte Controller ECOsmarte Water Treatment Chamber
Ionization / Oxidation Chamber

« Controller

Testing Kit »

ECOsmarte Testing Kit

For the most maintenance-free system on the market,
see the Totally Automated ECOsmarte System


Go Back   Contact Eco-$mart Eco-$mart, Inc.    (888) 329-2705 Print This Page