Lite-Deck from PolySteel is a super-strong, super-insulated roof and floor system which perfectly completes the thermal and structural envelope of your insulating concrete form (ICF) project.

Lite-Deck is the system of choice for roofing and flooring your PolySteel project. Lite-Deck has many advantages over other poured concrete floor/roof systems:

• 4-foot wide sections are available in addition to 2-foot wide sections for faster installation.
• 2", 4" and 6" Top Hat sections are quickly attached to the Base Section to produce the finished joist form. Allow for floors that can span greater distances or support heavier loads.
• There are six distribution sites for service throughout the U.S.
• Lite-Deck is more cost-efficient.
• Clear spans up to 40 feet.
• Forms produce nominal values of R-30 and more.
• Steel attachment members for drywall and fixtures.
• Increased jobsite safety.
• Reduced labor and shoring requirements.
• Horizontal to vertical slopes.
• An ideal solution for insulated tilt-up walls.

SPECS  To provide the load-bearing strength for a wide range of applications, panels are provided which produce concrete joist depths of 6", 8", 10", 12", 14", and 16" (including a minimum 2" concrete cover). Custom depths can be provided with some restrictions. A minimum 2-inch thick cover is required to provide full joist depth and strength. The joist width and other dimensions do not change. Conventional structural engineering is used to determine the appropriate concrete joist depth for each application. Panels are provided to within 1/2" of lengths specified.

DOUBLE WIDE PANEL  Available in all depths and lengths. Reduces handling and jobsite labor